Car Repair Work Order: Sample, Details and the 2026 Rules
Auto business8 min read
How to draw up a car service work order in Russia: what to include, sample with labour hours and parts, Rules No. 780, extra work and 8 mistakes.

For the client a work order is "what will be done to my car and for how much", for the service it is protection against disputes about scratches and unnecessary work. There is no single approved form, so each service invents its own. A good work order reads in a minute and is signed before work starts.

The one-minute calculation
Oil and brake pad replacement. The figures are illustrative.
| Item | Calculation | Amount, ₽ |
|---|---|---|
| Work | 3.2 labour hours × 2,500 ₽ | 8,000 |
| Parts (brake pads) | 1 set | 14,900 |
| Materials (oil, filter) | per delivery note | 3,600 |
| Total | 8,000 + 14,900 + 3,600 | 26,500 |
If the service is on the general tax regime, state whether 22% VAT is included in the prices. A labour hour is the cost of an hour of work per the price list, and the standard time is taken from manufacturer reference books or the service's price list.
What Rules No. 780 say
The Rules apply to services and work on maintenance and repair of motor vehicles: cars, motorcycles, trailers and their components. They came into force on 1 September 2025, and Resolution No. 290 ceased to be valid from that day. From the text of the Rules it follows that:
- the contract is concluded in writing and contains details of the contractor and the consumer, of the vehicle, a list of services, parts and materials, warranty periods, signatures (clause 9);
- if services are provided in the consumer's presence, the contract may be formalised by a receipt, a coupon, a cash receipt or another document confirming payment (clause 9);
- if the contract is concluded through a website or an app, information may be provided through them (clause 10);
- when the car is handed over, a handover-acceptance certificate is drawn up: completeness, visible damage, the client's parts and materials; the consumer is given one copy of the contract and of the certificate (clause 12).
In clauses 9–12, which describe the contract and the certificate, the word "work order" does not appear. So it is more accurate to say it this way: a work order is a document in which the service combines the contract terms and the acceptance data. If you use it in that role, check that it contains all the information from clauses 9 and 12.
What to put in a work order
| Block | What to state |
|---|---|
| Header | Number, date, contractor (name, address, TIN), client (name, phone) |
| Car | Make, model, VIN, plate number, mileage |
| Acceptance | Completeness, visible damage, fuel, personal belongings |
| Work | List, labour hours, price per labour hour, amount |
| Parts and materials | Name, article number, manufacturer, condition (new, used), quantity, price |
| Cost | Preliminary amount, VAT |
| Extra work | How it is agreed: call, messenger, limit without approval |
| Deadlines | When work will start and when the car will be released |
| Warranty | On work and on parts, period |
| Signatures | Client and the person who accepted, date |
Work order: sample
WORK ORDER No. [number] dated [date]
Contractor: [name], TIN [number], [address] Customer: [full name], phone [number] Car: [make, model], plate [number], VIN [number], mileage [number] km
Condition on acceptance: [damage, completeness, personal belongings]
Work:
No. Work Labour hours Price per hour, ₽ Amount, ₽ 1 [work] [1.2] [2,500] [3,000] Parts and materials:
No. Name Article Condition Qty Price, ₽ Amount, ₽ 1 [part] [article] [new] [1] [14,900] [14,900] Preliminary cost: [amount] ₽, [22% VAT / without VAT].
Extra work: [approve all / up to … ₽ / only by my call].
Car release date: [date]. Warranty: [period for work], [period for parts].
Customer: [signature, full name] Contractor: [position, signature, full name]
Extra work: the sorest spot
Disputes most often arise because a mechanic found "one more problem" and fixed it without a conversation. Write the procedure into the work order: a call, a messenger message with a photo of the fault and the client's reply, a limit on the amount that may be spent without approval. It is worth keeping the confirmation (correspondence, a call) with the work order.
If the client refused extra work, write it plainly: "recommended, client refused". This removes claims if the problem shows up later.
The client's parts and someone else's driver
If the client brought their own parts, write it in the work order and in the acceptance certificate: which parts, where from, who is responsible for their quality. If the car was brought not by the owner, a power of attorney is needed, and its data is entered in the document.
The consumer client's rights
If the client is an individual, the consumer protection law applies. Under it the consumer may demand elimination of defects, a price reduction, redoing the work or compensation of losses (Article 29 of the Law "On Protection of Consumer Rights"). The period for discovering defects where there is no warranty is a reasonable time, but within two years (Article 29), and the service warranty is usually written in the work order.
Eight mistakes
No description of the car's condition. A week later the client finds a scratch, and there is nothing to prove where it came from.
Work in one line. "Suspension repair" does not spell out what exactly was done.
No part article numbers. Then a dispute: was it an original or an analogue.
Extra work not agreed in writing. An oral agreement does not work in a dispute.
No deadline stated. The client waits a week for the car and does not know on what grounds.
No warranty. The Rules speak of warranty periods, but the client has none on paper.
No signatures. A work order without the client's signature is just paper.
The work order is kept on the counter. After the shift closes it can no longer be found.
How it works in Mestra
A work order is drawn up in your accounting program or on a form: Mestra cannot generate it from a template. But the client, the car and the whole history of work are gathered in one card.
For an auto business you set up process stages: "Acceptance", "Diagnostics", "Extra work approval", "In progress", "Ready for release", "Paid", each with an owner and a deadline. The client's messages from messengers lie in the same card, so confirmation of extra work is not lost. A scan of the signed work order and photos of damage are attached in the "Files" tab. An invoice is created from the card, its status changes with real payments, and a "How did it go?" reminder and a repeat-visit reminder are set up in advance.
Questions and answers
Is a work order mandatory?
Rules No. 780 require a written contract and a handover-acceptance certificate, and the words "work order" are not in the clauses about them. Many services nonetheless combine the contract and the acceptance certificate in such a document, and it is convenient.
Is a stamp needed?
No. A stamp is needed only if you set it in your internal rules yourself.
Can a work order be done electronically?
The Rules allow information to be provided through a website or an app (clause 10). A signature may be given electronically if you and the client have agreed.
How many copies?
The Rules require giving the consumer one copy of the contract and of the certificate (clause 12). The rest is up to the service.
What if the client did not sign the work order?
Do not start work. If work is already going on at an oral request, record it in correspondence and draw up the document as soon as possible.
Who is responsible for the client's parts?
The one who supplied the part is responsible for its quality unless otherwise written. State this in the work order.
Summary
A good work order records the car's condition, the list of work and parts, the price, extra work, the deadline and the warranty, and is signed before repair starts. Mestra keeps the work order next to the client, the correspondence and the invoice and reminds you about a repeat visit. The first 15 days are free, no card required.
Sources:


